Email:  
Password:  
Mesh Banner (10oz.)

Mesh Banner Printing

1 Sided Print on 10 oz. Mesh Banner

Custom full-color mesh banner printing is available in more than 100 sizes. Our mesh banners are ideal solutions for areas where the wind is an issue. Approximately 30% of the banner surface is perforated. Small holes allow the wind to go through the material, making it ideal signage for high-wind areas such as construction fencing. In addition, they are waterproof, UV safe, and very durable. Custom printed mesh banners are sent out hemmed and grommeted with brass grommets. However, other finishing options are available such as pole pockets, etc.

Recommendations: Your mesh banner will last a long time if installed correctly and handled accordingly. We recommend printing banners with hemmed edges for extra durability and brass grommets every two feet along the edges. When installing your mesh banner, we suggest using all grommets to distribute the tension evenly across the banner to prevent any long-term damage. Never fold your mesh banner! Instead, roll your banner when not in use and then store it.

Printing Time: Once you have approved your banner print design, it usually takes 2-3 business days for your banner to be printed, cut, and packaged to ship.

Shipping Time: Shipping time is usually 2 to 5 business days. The transit time depends on your location and is not the same as the printing turnaround time. Shipping time begins the moment your order has been printed, packaged, and accepted by the carrier. Additional shipping options such as an upgrade to 2nd Day Air are available at the checkout.

10 oz. mesh banner 10 oz. Mesh Vinyl Banner
10 oz. mesh banners are ideal for areas where the wind is an issue. Approximately 30% of the material surface consists of small perforated holes that allow the wind to pass thru the banner making this material ideal for high wind locations. In addition, this material is durable, long-lasting, waterproof, and UV safe.

Templates: Download the template, then open it in your design program. Your template will be in the correct size, resolution, and color mode. Use the template as a guide, and when done designing, delete the template layer and save your finished artwork without the template guidelines and instructions.

Half the scale templates: Banners larger than 15ft need to be designed at half the scale, meaning half the size of an actual print size due to very large file size.

Example: If 4x20ft is print size, half-scale of that size would be 2x10ft.

Save and use these templates when setting up your design.
File requirements for this product:
Full Scale Resolution: 150 DPI at size: 100%
1/2 Scale Resolution: 200 DPI at size: 50%
1/3 Scale Resolution: 150 DPI at size: 33%
You must save the template first, and then open it in your design program.
PC users:
right-click link, select "Save Target As..."
MAC users: control-click link, select "Download Linked File As..."
This color means 1/2 the scale templates This color means 1/3 the scale templates
1x5ft 2x4ft 3x4ft 4x4ft     6x23ft
1x6ft 2x5ft 3x5ft 4x5ft 5x5ft   6x24ft
1x7ft 2x6ft 3x6ft 4x6ft 5x6ft 6x6ft 6x25ft
1x8ft 2x7ft 3x7ft 4x7ft 5x7ft 6x7ft 6x26ft
1x9ft 2x8ft 3x8ft 4x8ft 5x8ft 6x8ft 6x27ft
  2x9ft 3x9ft 4x9ft 5x9ft 6x9ft 6x28ft
1x10ft 2x10ft 3x10ft 4x10ft 5x10ft 6x10ft 6x29ft
1.5x5ft 2x11ft 3x11ft 4x11ft 5x11ft 6x11ft 6x30ft
1.5x6ft 2x12ft 3x12ft 4x12ft 5x12ft 6x12ft 6x31ft
1.5x7ft 2x13ft 3x13ft 4x13ft 5x13ft 6x13ft 6x32ft
1.5x8ft 2x14ft 3x14ft 4x14ft 5x14ft 6x14ft 6x33ft
1.5x9ft 2x15ft 3x15ft 4x15ft 5x15ft 6x15ft 6x34ft
1.5x10ft 2x16ft 3x16ft 4x16ft 5x16ft 6x16ft 6x35ft
  2x17ft 3x17ft 4x17ft 5x17ft 6x17ft 6x36ft
8x8ft 2x18ft 3x18ft 4x18ft 5x18ft 6x18ft 6x37ft
8x9ft 2x19ft 3x19ft 4x19ft 5x19ft 6x19ft 6x38ft
8x10ft 2x20ft 3x20ft 4x20ft 5x20ft 6x20ft 6x39ft
          6x21ft 6x40ft
          6x22ft  

Accepted File Formats: .TIF, .TIFF, .EPS, .AI, .PSD, .JPG, .PNG & .PDF.
Do not upload word documents, publisher files, etc., instead save it as .pdf

Resolution: 150 DPI (Dots Per Inch)

Color Mode: CMYK

--- Safe line: All text, images, logos, etc., need to stay inside the blue line. Anything left outside the blue line may be cut off.

--- Cutting line: This is approximately where your print will be cut. Because of possible shifting during the cutting process, borders are not recommended, and as a result, borders may appear uneven.

--- Bleed line: Your background needs to extend to the edge of the black line.

    REMINDER!

  • Please send artwork without blue, pink, and black guidelines.
  • No crop marks.
  • Zoom in to 100% to check your resolution quality. Your artwork will print as sharp as it looks at 100% zoom.
  • If you send files as .eps .pdf or .ai, all texts should be converted to outline.
  • If using Photoshop, flatten your image, and save it as .jpg or .pdf. That will prevent fonts from converting to defaults.

Example of low resolution vs. high resolution (print-ready files)

Error: If a yellow box appears on top of the page that says "Please correct the following," it means that you didn't select one of the required options from the drop-down menu. So be sure to go thru each drop-down option and make a proper selection, such as "size, quantity, proofs..."

File Upload: Most files upload within seconds, but sometimes large files can even take up to 20 minutes to upload. It mainly depends on your internet speed and what size and format file you are uploading. For fastest uploads, flatten your layers and save as PDF or JPG, but make sure that your resolution and size stay the same and are not smaller than required. If you keep receiving an error, check that you are uploading the correct file format. The server will not accept any other file format.

Design Help: If you need someone to design your files for print, please go here and get your artwork ready.

Useful Links: Next to menu options, you will notice little question mark icons. You can click on them for more info about that specific option.
= Click on them for more info.


Mesh Banner (10oz.)

Quantity Discounts Available Size:





? For us to print your files accurately, please upload print-ready high-resolution files.

If your files are not ready for printing, we recommend preparing them with a graphic designer before placing your order.

If you require assistance with your artwork or need a designer, we recommend visiting our creative studio before placing your print order to ensure your files are ready. Click here to go to our Creative Studio

We suggest using our blank templates as a guide to ensure your files are set up correctly.





? PRINTING TIME:

After you have given your approval for the print design, your order will be sent to production. The printing time varies based on the product, quantity, and finishing options you choose, and it is not the same as the shipping time. Generally, large format printing takes around 2-3 business days for production, while stationery products take a bit longer, approximately 2-5 business days for printing, cutting, and packaging before shipping. For products with quantities over 2500 or require drilling, gluing, or have round corners, they might need an additional day to complete. Similarly, quantities over 5000 require an extra day per 5000. Printing time is an estimated time and not a guaranteed time. Business days are from Monday to Friday, excluding weekends and holidays. The printing time begins once you approve your order/design proof for printing.



? ACCEPTED FILE FORMATS:

You can upload the following file formats: .TIF, .TIFF, .EPS, .AI, .PSD, .JPG, .PNG, and .PDF.
Avoid uploading Word documents or publisher files. Instead, save them as a .PDF file format.

If you try to upload an artwork file that isn't in the approved file format, a red warning message will appear on the top of your shopping cart screen. Only file formats that are accepted will be uploaded with your order.

If you receive a 404 error, your file is too large. The maximum file size for an upload is 75MB (megabytes) per file. If your files exceed this size, consider uploading them in .jpg format. Ensure that your files are the correct size and resolution. If you want to upload a file in a different format, you must flatten all layers and convert the text to outlines.

We recommend using our blank templates as a guide when creating your design to ensure your files are set up correctly. NO CROP MARKS!

Max. file upload size: 75MB




Quantity:

$32.00

& FREE SHIPPING!

FILE UPLOAD: Can take up to 10 minutes. After clicking "ADD TO CART" do not click back. Do not click on any links. Please wait for the next page.

IMPORTANT NOTICE! Production time is an estimate, not a guarantee. Shipping time begins after your order is printed and accepted by the carrier. Business days are Monday to Friday, excluding weekends and holidays.
. Contact
tel: 801.477.7234
[best contact] e-mail: info [at] cardsandbanners.com
address: Salt Lake City, UT 84107
business hours: 24/7 online access
customer support: Monday - Friday
9:00am - 5:00pm MST
We are a web-based printing company.
All orders must be placed thru our website.
space bar
Information
About us
Customer Reviews
Privacy Notice
Shipping & Returns
Conditions of Use
Brokers Program
Loyalty Program
space bar
Customer Support
File a Claim / Report an Error
Pay Invoice
Help Center
Custom Estimate
Facebook Twitter Instagram Pinterest YouTube
space bar
Useful Links
How to Place an Order
Upload Missing File
Blog
Create a New Account
News & Updates

Subscribe to our mailing list.
Periodically we like to send special offers and updates to our customers.

 
 
Copyright © 2024 Menicanin Design, LLC dba logoCARDSandBANNERS.com | All rights reserved.